Description
Stihl HT 56 C-E 10″ Telescope Gas Powered Pole Pruner
Trim high tree limbs safely from the ground with the STIHL HT 56 C-E 10" Gas Pole Pruner. It's built for large property owners, estate caretakers, and grounds crews who need steady power without dangerous ladders.
Driven by a 27.2 cc low-emission 2-stroke engine, this pruner cuts clean through branches with a 10-inch guide bar and 1/4" STIHL PICCO™ micro saw chain. Starting takes very little effort thanks to STIHL Easy2Start™ technology, which needs just a smooth pull. The two-piece split shaft breaks down in seconds, making truck transport easy. At 9 feet 2 inches long, it lets you prune overhead branches up to 13 feet high while keeping both feet on solid ground.
- Effortless Easy2Start™ (E) System: Spring-assist starter cuts cord resistance in half for smooth, two-finger pull starts.
- Fuel-Efficient 27.2 cc Engine: Delivers 1.1 bhp of cutting power with lower emissions and better fuel economy.
- Extended 9'2" Working Length: Trims overhead branches up to 13 feet high safely from the ground.
- 10" Bar & 1/4" PICCO™ Micro Chain: Narrow-kerf chain cuts fast and smooth with reduced kickback.
- Two-Piece Split Shaft: Breaks down quickly for compact storage in car trunks and truck beds.
- Translucent Fuel & Oil Tanks: Clear fluid tanks let you check gas and chain oil levels at a glance.
- Side-Access Chain Tensioner: Adjusts bar and chain tightness through the sprocket cover without touching sharp cutters.
Specifications
| Specification | Details |
| Brand | STIHL |
| Model / Part Number | HT 56 C-E (Part #: 41392000009) |
| Engine Displacement | 27.2 cc (1.66 cu. in.) |
| Engine Power Output | 0.8 kW / 1.1 bhp |
| Starting System | Easy2Start™ (E) Dual-Spring Assist Pull-Start |
| Guide Bar Length | 10 in. (25 cm) |
| Chain Pitch / Type | 1/4" STIHL PICCO™ Micro Mini 3 (71 PM3) |
| Overall Assembled Length | 9 ft. 2 in. (280 cm) |
| Max Working Reach | Up to 13 ft. (based on user height) |
| Shaft Design | 2-Piece Split Shaft with Tool-Free Coupler |
| Fuel Tank Capacity | 11.5 fl. oz. (340 cc) |
| Chain Oil Capacity | 7.4 fl. oz. (220 cc) |
| Weight | 12.3 lbs (5.6 kg) without fuel, bar, and chain |
Frequently Asked Questions
Is the shaft on the HT 56 C-E telescopic or fixed length?
The HT 56 C-E uses a rigid two-piece split shaft that measures 9 feet 2 inches when assembled. It does not slide in and out like a telescoping model, but it splits apart into two pieces for easy vehicle transport and storage.
How does the Easy2Start™ mechanism work?
Easy2Start uses an internal helper spring between the pull cord and crankshaft. A slow, steady pull winds the spring, which then releases to spin the engine over automatically. You won't have to jerk the starter cord hard.
What overhead reach can I expect with this pruner?
With an assembled tool length of 9 feet 2 inches, most users can trim branches 12 to 13 feet above the ground while standing flat.
What fuel mix does this engine use?
The 2-stroke engine requires a 50:1 fuel mixture of 89-octane gasoline and air-cooled 2-cycle oil, such as STIHL HP Ultra, or pre-mixed STIHL MotoMix.
Can I attach string trimmer or edger heads to this shaft?
No. The HT 56 C-E is a dedicated pole pruner. For an interchangeable system that uses multiple attachments, look at the STIHL KombiSystem line (like the KM 56 RC-E or KM 91 R).
Product Specifications
selling_points: |
✔ Easy2Start Technology: Pull-cord spring mechanism eliminates heavy pulling for effortless engine startups ✔ 27.2cc 2-MIX Engine: Fuel-efficient motor provides reliable cutting power while reducing emissions |
category_bullets: |
Reliable 27.2 cc STIHL 2-MIX engine delivers high-efficiency power while reducing fuel consumption and emissions Easy2Start system features an extra spring mechanism to eliminate hard pulls for effortless engine starting |
