SOWA Metalworking Solutions

SOWA 105-210 General Purpose HSS Jobber Drill Bit - 11/32 inch High-speed steel (HSS) HSS bits are hard and much more resistant to heat than high-carbon steel Can be used to drill:Straight shank118° Point Metal Hardwood Most Other...

SOWA HSS Prentice Drill Bit High-speed steel (HSS) HSS bits are hard and much more resistant to heat than high-carbon steel Can be used to drill:Black oxide finish118° Point Metal Hardwood Most Other Materials Cutting Diameter =...

SOWA 113-032 Hand Tap - Taper - #6-32High-speed steel (HSS)HSS bits are hard and much more resistant to heat than high-carbon steelCan be used to start the thread in a blind hole for another tap to finish First 7-10 threads at the tip ground flatter than...

SOWA 113-050 Hand Tap - Taper - #12-24High-speed steel (HSS)HSS bits are hard and much more resistant to heat than high-carbon steelCan be used to start the thread in a blind hole for another tap to finish First 7-10 threads at the tip ground flatter...

SOWA 113-104 Hand Tap - Taper - #10-32High-speed steel (HSS)HSS bits are hard and much more resistant to heat than high-carbon steelCan be used to start the thread in a blind hole for another tap to finish First 7-10 threads at the tip ground flatter...

SOWA 113-116 Hand Tap - Taper 1/4 inch -20High-speed steel (HSS)HSS bits are hard and much more resistant to heat than high-carbon steelCan be used to start the thread in a blind hole for another tap to finish First 7-10 threads at the tip ground flatter...

SOWA 113-122 Hand Tap - Taper 5/16 inch -18High-speed steel (HSS)HSS bits are hard and much more resistant to heat than high-carbon steelCan be used to start the thread in a blind hole for another tap to finish First 7-10 threads at the tip ground...

SOWA 113-128 Hand Tap - Taper 3/8 inch -16High-speed steel (HSS)HSS bits are hard and much more resistant to heat than high-carbon steelCan be used to start the thread in a blind hole for another tap to finish First 7-10 threads at the tip ground flatter...

SOWA 113-140 Hand Tap - Taper 1/2 inch -13High-speed steel (HSS)HSS bits are hard and much more resistant to heat than high-carbon steelCan be used to start the thread in a blind hole for another tap to finish First 7-10 threads at the tip ground flatter...

SOWA 113-434 HSS NPT Tap - 1/4 inch High-speed steel (HSS) HSS bits are hard and much more resistant to heat than high-carbon steel Low angle specially designed for cast iron High hook specially designed for stainless steel National Pipe Thread...

SOWA 113-436 HSS NPT Tap - 3/8 inchHigh-speed steel (HSS)HSS bits are hard and much more resistant to heat than high-carbon steelLow angle specially designed for cast ironHigh hook specially designed for stainless steelNational Pipe Thread Taper (NPT)Tap...

SOWA 113-705 Adjustable Tap Wrench - 100mmT-handle; have a sliding handle and chuckDesigned for hand tapping in tight spaces or where extra reach is required Tap wrench can also be used to turn other tools such as reamers or screw extractorsTap Range =...