Description
Dynamic DYSFP746133/6 Dyna-Pak Fixed and Continuous Y-Lanyard 1.75" x 6'
Maintain continuous, 100% tie-off safety while moving around structural hazards with the Dynamic Safety FP746133/6 (DYSFP746133/6) Dyna-Pak™ 6' Dual-Leg Continuous Y-Lanyard. Manufactured in Canada by Dynamic Safety / PIP Global, this heavy-duty double-leg shock-absorbing lanyard allows ironworkers, scaffolders, and industrial contractors to safely transition between anchor points without ever detaching.
Engineered with continuous 1-3/4" (45 mm) high-tenacity polyester webbing, the FP746133/6 delivers superior tear strength and abrasion resistance across sharp, abrasive edges. At the center is an integrated Dyna-Pak™ tear-webbing energy absorber engineered to cushion deceleration forces and keep impact loads safely below regulatory limits during a fall. Hardware includes an ergonomic, double-locking steel snap hook (FP6650HS) on the harness center and two double-locking steel rebar hooks (FP5386HS) on the leg ends, providing the wide gate clearance needed to connect directly onto scaffolding pipes, lattice towers, and structural beams.
Key Features:
- 100% Tie-Off Continuous Protection: Dual-leg "Y" design allows workers to remain anchored with one leg while moving the second leg to the next anchor point.
- Integrated Dyna-Pak™ Energy Absorber: Deploys progressively under dynamic load to dissipate kinetic energy and soften deceleration impact forces.
- Dual Double-Locking Rebar Hooks (FP5386HS): Wide-gate opening allows direct tie-off to scaffolding poles, structural iron, and rebar grids without additional anchor strops.
- Ergonomic Double-Locking Snap Hook (FP6650HS): Connects securely to the dorsal D-ring of any compliant full-body harness with two-step anti-roll-out protection.
- Heavy-Duty 1-3/4" (45 mm) Continuous Webbing: Premium woven polyester provides maximum UV, cut, and abrasion resistance in harsh industrial environments.
- CSA Z259.11-17 Certified: Rigorously tested and certified to Canadian safety standards, meeting all OSHA and ANSI fall protection requirements.
Specifications
| Specification | Details |
| Brand | Dynamic Safety (PIP Global Canada) |
| Series | Dyna-Pak™ |
| Model / MPN | FP746133/6 (BigCommerce SKU: DYSFP746133/6) |
| UPC | 620606514130 |
| Lanyard Style | Dual-Leg (Twin-Leg) Continuous Y-Lanyard |
| Length | 6 ft. (1.8 m) |
| Webbing Width | 1-3/4 in. (45 mm) |
| Webbing Material | Premium High-Tenacity Woven Polyester |
| Shock Absorber | Integrated Dyna-Pak™ Tear-Webbing Energy Absorber |
| Harness Connector | (1) Double-Locking Forged Steel Snap Hook (Model FP6650HS) |
| Anchorage Connectors | (2) Double-Locking Heavy-Duty Rebar Hooks (Model FP5386HS) |
| User Weight Capacity | 132 to 352 lbs (60 to 160 kg) combined worker + gear load |
| Product Weight | Approx. 5.0 lbs |
| Certifications | CSA Z259.11-17 Certified, ANSI Z359, OSHA Compliant |
| Country of Origin | Made in Canada |
Frequently Asked Questions
What is the primary advantage of a dual-leg "Y" lanyard?
A dual-leg Y-lanyard provides 100% tie-off capability. It allows a worker traversing structural steel, scaffolding, or communication towers to clip one leg into a new anchorage point before disconnecting the other leg, ensuring continuous, uninterrupted fall protection.
What size structure will the rebar hooks fit around?
The FP5386HS forged steel rebar hooks feature an oversized throat opening (typically 2-1/4 inches), allowing direct and rapid connection to scaffolding tubing, angle iron, rebar grids, and standard structural beams without requiring supplementary anchor straps.
What is the difference between Dyna-Pak™ and Dyna-ONE™ lanyards?
Both are premium energy absorbers made by Dynamic Safety / PIP Global. The Dyna-Pak™ system utilizes a dedicated pack of tear webbing encased in heavy-duty protective sleeving, engineered to decelerate the fall and limit arrest forces to safe levels within CSA Z259.11 standards.
What worker weight range is this lanyard certified for?
This lanyard is certified under CSA standards for a combined total weight of 132 lbs to 352 lbs (60 kg to 160 kg), which encompasses the worker's body weight along with all clothing, boots, and carried tool belts.
Can this lanyard be anchored at foot level?
Standard 6-foot shock-absorbing lanyards are designed to be connected to anchor points located at or above the dorsal D-ring level. Always calculate your fall clearance requirements (lanyard length + deceleration distance + worker height + safety factor) before selecting your tie-off point.
Product Specifications
category_bullets: |
6-foot double-leg (Y-type) tie-off lanyard designed for 100% continuous fall protection 1.75-inch heavy-duty polyester webbing built to withstand rigorous industrial environments |
selling_points: |
✔ 100% Tie-Off Y-Design: Dual legs allow continuous attachment while moving ✔ Shock-Absorbing Pack: Built-in dampening reduces peak fall arrest forces |
