Description
Asphalt Anchors SP12-38 - BoltHold 3/8" x 12"
Sold per each
Each anchor incorporates a 3/8"-16 UNC female tread. The tread of the bolt inside the anchor should not exceed 2.5". The anchor requires a 7/8" hole 12" deep and the use of a grout such as EPX2. A 1.4" welded washer at the top of the anchor prevents the anchor from dropping down below the surface as well as preventing the anchor from being pulled up into the mounting plate when the bolt is tightened.
SP12 is a heavy duty asphalt anchor rated at 2,000 lbs. pull. The 12" long anchor is designed to mount plates, fences, machinery directly to asphalt surfaces.
The SP12 anchors are mounted flush with the surface, so that attached devices can be removed without leaving screws or protrusions.
The anchor should be ready for use in 15 minutes (depending on the grout and ground temperature)
Always consult the latest installation instructions before installing these anchors.
Specifications:
- Body Diameter: 5/8"
- Finish: Zinc
- Material: Carbon Steel
- Thread: UNC
- Thickness: 0.08"
- Thread Depth: 2.5"
- Pull Rated: 2,000 lb
- Shear Rated:1,500 lb
- Torque Rated: 220 lb-in
- Drill Hole: 7/8"
Applications:
- Bike & Kayak Racks
- Fences
- Signage
- Solar Panels
- Carports
- Speed Bumps/Humps
- Parking Blocks/Stops
- Oil drum tie down
- Parking Barriers
- Sound Barriers
- Railings and Guardrails
- Shopping cart corrals
- Road Plates
- Lighting
