Description

Walter Surface Technologies 05-B 008 ICECUT 1/2" Annular Cutter

Walter Surface Technologies 05-B 008 ICECUT 1/2" Annular Cutter was designed for use where lubricants are not permitted or problematic to apply. It can outperform any Titanium (TiN) or Titanium-Aluminum (TiAIN) coating cutters and is capable of withstanding at least 200º Celsius higher temperatures. Can produce less heat than a conventional TiAIN cutter making the ICECUT more resistant to higher stress under load and instant impact.

Diameter: 1/2"
Length: 1"
Flute Type: Extra Large
Shank Type: Weldon
Fully ground extra large flutes
Modern tooth design and cutter geometry
New high technology coating
Universal shank

Designed for drilling in:

Aluminum
Stainless steel
Steel
Structural Steel

View AllClose

Walter Surface Technologies 05-B 010 ICECUT 1" x 5/8" Annular Cutter

Walter Surface Technologies

$97.98

Walter Surface Technologies 05-B 010 ICECUT 1" x 5/8" Annular Cutter Walter Surface Technologies 05-B 010 ICECUT Annular Cutter – 1″ Long x 5/8″ was designed for use where...

CUTTER 7/8-1" ANNULAR ICECUT

$121.50

Carbide Core Cut Annual Cutters, Weldon Shank Annular Cutter 3/4" — Add to Cart

Quick view

Walter Surface Technologies 05-D 012 Carbide Core Cut Annular Cutters, Weldon Shank 3/4"

Walter Surface Technologies

$117.00

Walter Surface Technologies 05-D 012 Carbide Core Cut Annular Cutters, Weldon Shank 3/4" Walter Carbide Core Cut annular cutters accurately drill large diameter holes in a variety of hard or...

Walter 05-Z 002 Annular Cutter Pilot Pin - 2"

Walter Surface Technologies

$17.80

Walter 05-Z 002, Annular Cutter Pilot Pin - 2" Description: Walter pilot pins are used to position annular cutters precisely over drilling spot and eject slug after drilling is completed.Pins are...

Walter 05-Z 001 Annular Cutter Pilot Pin - 1"

Walter Surface Technologies

$17.80

Walter 05-Z 001 Annular Cutter Pilot Pin - 1" Walter pilot pins are used to position annular cutters precisely over drilling spot and eject slug after drilling is completed. Pins are precision...

Walter 05-D 313 Carbide Core Cut Annular Cutter- 13/16" X 2"

Walter Surface Technologies

$135.00

Walter 05-D 313 Carbide Core Cut Annular Cutter- 13/16" X 2" Description: These carbide core cutters are designed toaccurately drill large diameter holes in a variety of hard or abrasive materials...