Simpson Strong-Tie THD50600H Titen HD Hex Screw Anchor Zinc 1/2" x 6"

• Product no. THD50600H
• Material: Zinc plated carbon steel
• Diameter: 1/2″
• Length: 6″
• Drill bit diameter: 1/2″
• Wrench size: 3/4″
• Recommended Fixture Hole Size: 5/8″ to 11/16″
• For use in cracked and uncracked concrete, as well as uncracked masonry
• Offers low installation torque and outstanding performance
• Designed and tested in dry, interior, non-corrosive environments or temporary outdoor applications
• Demonstrates industry-leading performance even in seismic conditions
• Code listed under IBC/IRC in accordance with ICC-ES AC193 and ACI 355.2 for cracked and uncracked concrete per ICC-ES ESR-2713
• Code listed under IBC/IRC in accordance with ICC-ES AC106 for masonry per ICC-ES ESR-1056
• Qualified for static and seismic loading conditions
• Thread design undercuts to efficiently transfer the load to the base material
• Standard fractional sizes
• Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
• No special drill bit required & designed to install using standard-sized ANSI tolerance drill bits
• Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
• Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
• Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
• Reuse of the anchor to achieve listed load values is not recommended