Taylor

Taylor FP100-38/316 3/8" 316 S/S Square Channel Washer  Designed for use with 1-5/8″ wide strut channel Rod Size: 3/8" Hole Diameter: 7/16"  

Taylor 407Z-38 3/8" Wide Mouth Top Beam Clamp #310 Recommended for use under roof installations with bar joist type construction, or for attachment to top flange of structural shapes. Details ...

Taylor 28R 1/4" Zinc Ceiling Flange Malleable wall plate Designed to be attached to a structure for connecting a hanger rod or threaded rob to support a pipe hanger Cast Material: Zinc

Taylor #406 Beam Clamp 1/2" 1/2" - 7/8" Malleable Iron* c/w hardened steel cup point set screw Bare Metal

Taylor 406Z-12 Small Mouth Top Beam Clamp #406, 1/2" Fits 1/2" through 1" Comes with steel cup point set screw Bare metal

Taylor 406Z-58 Small Mouth Top Beam Clamp #406, 5/8" Fits 5/8" through 1 3/8" Comes with steel cup point set screw Bare metal

Taylor FP200 2-Hole Flat Splice Plate Zinc plated steel For splicing strut channel Length: 3 1/4 inchWidth: 1 5/8 inchThickness: 1/4 inchHole Size: 9/16 inchHole Spacing: 13/16 inch from edge and...

Taylor Pipe Strap 1 1/2" 2 Hole -1/2" Through 6"-Carbon Steel-Pre- Galavanized-Follows with MSS SP-58 and SP-69-Recommended for supporting of light-duty conduit on walls or side beams.-Not...

Taylor AF302 3-Hole Angle Plate 2 1/4 inch x 3 1/2 inch Zinc plated steel For joining strut channel Leg lengths: 2 1/4 inch x 3 1/2 inch Leg Width: 1 5/8 inch Thickness: 1/4 inch Hole Size: 9/16...

Taylor FP100 Square Channel Washer ZINC PLATED STEEL *Per Each Piece.  

Taylor AF400 4-Hole Angle Plate 3 1/2 inch x 4 1/8 inch Zinc plated steel For joining strut channel Leg lengths: 3 1/2 inch x 4 1/8 inch Leg Width: 1 5/8 inch Thickness: 1/4 inch Hole Size: 9/16...

Taylor AF221-2 2-Hole Open Angle 2" x 3 1/4" Zinc plated steel For joining strut channel 45 Degree Leg lengths: 2 inch x 3 1/4 inch Leg Width: 1 5/8 inch Thickness: 1/4 inch Hole Size: 9/16 inch...