Description
nVent CADDY TSR1220N Telescoping Strut Replacement, No Nut
Static Load 1 represents a distributed load for 12" - 20" (300 - 500 mm) installations and a point load for 12" - 16" (300 - 400 mm) installations. ​Static Load 2 represents a point load for 16" - 20" (400 - 500 mm) installations.
Features
- Can be attached directly to a wall for wall-mounted applications​
- Telescopes to the desired length and is locked in place by snapping closed a spring retainer clip
- Standard strut profile runs the entire length of the part, allowing most standard fittings to be placed anywhere between the rods
- Integrated ruler displays space between hanger rods in inches and centimeters
- Supports up to seven 2" (50 DN) conduits, six 2" (50 DN) water filled pipes at 10' (3 m) spacing, or up to 18” (450 mm) cable tray
- Conduit can be supported on the top and bottom, eliminating the need for double sided strut
- Conduit and pipe can be placed directly on the strut profile, saving vertical space in buildings with limited room for installation
Specifications
| Part Number | TSR1220N |
| Material | Steel |
| Finish | Pregalvanized |
| Hole Size 1 (HS1) | 0.54" |
| Hole Size 2 (HS2) | 0.19" |
| Thickness (T) | 0.04" |
| A | 12 1/2" – 20" |
| B | 14" – 21 1/2" |
| C | 1 5/8" |
| D | 7/8" |
| E | 1 3/8" |
| Static Load 1 (F1) | 300 lb |
| Static Load 2 (F2) | 200 lb |
| Quantity | 1 pc |
| UPC | 78285691645 |
| EAN-13 | 0782856916451 |
