Description
Milwaukee M18 FUEL™ Duplex Nailer (2844-20)
The Future of Formwork. Drive Duplex Nails 7x Faster with Zero Ramp-Up and No Gas Cartridges.
The Milwaukee M18 FUEL™ Duplex Nailer is a first-of-its-kind solution designed to drastically increase productivity for concrete formers and scaffolding crews. This tool delivers the power to sink duplex nails into the toughest materials while providing a 7x increase in speed over hand-driving. Featuring a nitrogen spring mechanism, the 2844-20 offers zero ramp-up time, ensuring that the nail is driven the instant you pull the trigger—eliminating the lag found in other cordless nailers.
Built for the professional jobsite, this nailer runs exclusively on M18™ REDLITHIUM™ batteries, eliminating the recurring costs and maintenance of gas fuel cells and the trip hazards of pneumatic hoses.
Key Features & Professional Benefits:
- 7x Faster Than Manual Driving: Dramatically reduces the labor hours required to build and brace concrete forms, scaffolding, and temporary structures.
- Zero Ramp-Up Time: The nitrogen air spring motor provides pneumatic-like responsiveness, firing nails as fast as you can move without the delay of a "spinning" motor.
- No Gas Cartridges Needed: 100% battery powered. Save hundreds of dollars per year on fuel cells and eliminate the need for regular gas-chamber cleaning.
- Optimized for Duplex Nails: Specifically designed to fire 21-degree plastic collated duplex nails, ensuring the second head remains exposed for easy removal during teardown.
- Tool-Free Depth Adjustment: A simple dial allows for precise control of drive depth, ensuring your forms stay tight while keeping the pull-head accessible.
- Dry Fire Lockout: Automatically stops the tool from firing when the magazine is low to prevent damage to the driver blade and the workpiece.
- Integrated Rafter Hook: A rugged, folding hook makes it easy to hang the tool on forms or ladders between tasks, keeping it off the ground and within reach.
Product Specifications:
| Attribute | Specification |
| Model Number | 2844-20 (Bare Tool) |
| Fastener Type | 21° Plastic Collated Duplex Nails |
| Nail Length Range | 2-7/8" – 3-1/2" |
| Firing Rate | Up to 2 Nails Per Second |
| Weight (Bare Tool) | 9.8 lbs |
| Power Source | M18™ REDLITHIUM™ |
| Magazine Capacity | 1 Strip (Approx. 33-35 Nails) |
Redefine Your Teardowns
The 2844-20 isn't just about driving nails faster; it’s about making the entire job cycle more efficient. By providing consistent depth control, it ensures that every duplex nail is ready for the pry bar when the forms are stripped, reducing material damage and saving time during the teardown phase. For the concrete professional who values speed, durability, and a lower cost of operation, the M18 FUEL™ Duplex Nailer is the ultimate competitive advantage.
Stop hammering and start producing. Upgrade to the Milwaukee 2844-20 and set your forms 7x faster with M18 FUEL™ power.
Complete Your Formwork Setup
Maximize your productivity by ensuring you have the right power and fasteners for the day's pour.
[→ SHOP ALL 21-DEGREE DUPLEX NAILS HERE]
- [M18™ HIGH OUTPUT™ CP3.0 Battery] – Top Recommendation: Provides the power you need with a lightweight profile for all-day use on vertical forms.
- [Shop 21° Plastic Collated Duplex Nails] – Stock up on 2-7/8" and 3-1/2" nails to keep your crew running.
- [Milwaukee M18™ Multi-Voltage Rapid Charger] – Cycle your batteries 40% faster so you never run out of power mid-build.
Product Specifications
category_bullets: |
Concrete Form Specialist: Designed specifically for rapid assembly of temporary wooden structures. Pneumatic Performance: Delivers the power to seat duplex nails in various woods and engineered lumber. |
selling_points: |
✔️ Hose-Free: Eliminate compressors for faster setup and safer jobsites. ✔️ Instant Fire: Zero ramp-up time for high-speed production. ✔️ Pro Ready: Optimized for concrete formwork and temporary bracing. |
