Machine Screw #8-32 x 1" - Flat Head Robertson - Stainless Steel Flat/countersunk head sink into the material; makes screw head flush to or below the surface Stainless Steel corrosion resistance in...
Machine Screw #8-32 x 3/8 inch - Hex Head - Stainless Steel
Allow for more torque to be applied to the screw with a socket wrench
Often used with a nut as a means of tightening
Most commonly offered...
Machine Screw #4-40 x 3/4" - Pan Head Phillips - Stainless Steel Pan heads have a flat underside, short vertical sides with a round top edge Stainless Steel corrosion resistance in outdoor and...
Machine Screw #8-32 x 3/4" Oval Head Stainless Steel Oval heads decorative screws with countersunk bottoms and rounded tops Screw length is measured from the oval top side of the head to the end of...
Machine Screw #8-32 x 3/4" - Round Head Square Drive - Stainless Steel
Round heads have a flat underside, short vertical sides with a rounded top edge
Corrosion resistance in outdoor and marine...
Machine Screw #10-24 x 3/4 inch - Round Head Phillips - Stainless Steel Round heads have a flat underside, short vertical sides with a rounded top edge Screw length is measured from the flat...
Machine Screw #10-32 x 3/4 inch - Round Head Robertson - Stainless Steel Round heads have a flat underside, short vertical sides with a rounded top edge Screw length is measured from the flat...
#6 x 1" Flat Head Phillips Type A Screws Stainless Steel Deep thread with minimum diameter and less material displacement Sharp thread angles and points Allows for a flusher placeme
Socket Cap Screws 8/32 inch x 1/2 inch Stainless Steel SOLD PER EACH Commonly used in:Socket head enables driving where there is not sufficient space for wrenches or sockets
