Hex Nuts

1 inch Hex Nut - Bare - Coarse Grade 5 Steel Most common due to its strength properties Unalloyed steel may be surface treated to enhance corrosion resistance and other desirable properties

2H Structural Hex Nut, A194 - Galvanized Versatile Should be used with any low carbon bolt or screw that is heat-treated, Bare Finish Slightly thicker and larger than standard hex nuts Intended for High-Pressure and/or High-Temperature applications ...

Heavy Hex Nuts A194 Plain A194 2H Heavy Hex Nuts are manufactured from 1045 steel to meet or exceed ASTM A194 Grade 2H Are slightly thicker and larger than standard (finished) hex nuts Intended for use in high-pressure and/or high-temperature...

Hex Nut - Galvanized - Coarse Grade 2 For general applications Galvanized finish Use with bolt of the same diameter, thread pitch, and finish

Hex Nut - Yellow Zinc - Coarse Grade 8 Most versatile and widely used nut Should be used with any low carbon bolt or screw that is heat-treated Protects the bolt from corrosion Typically used in outdoor applications

Hex Nut Zinc Metric 1.50 thread pitch For general applications Use with bolts of the same diameter, thread pitch and finish

Hex Nuts Grade 2 Zinc NC Zinc plated to meet ASTM Specification B633, Class SC4, Type 1. Used in conjunction with low carbon bolts and screws that are not treated. Formed from Grade 2 steel. Rockwell Hardness ranges from B68-C32. THREADS are Unified...

Hex Nuts Stainless Steel Coarse NC (18.8 ST/ST) Thread Type: Coarse 18.8 304  Stainless Steel for good corrosion resistance Nut size (diameter) corresponds with bolt size diameter.  Also true for thread count,  ie. coarse thread 1/2-13...

Hex Nuts- Grade 2 Bare- CoarseHexagonal shaped nut with internal screw thread. Plain bare finish.Works with a large selection of fasteners.

M10 Hex Nut - 1.50 - Zinc - 10.9 1.50 thread pitch For general applications Use with bolts of the same diameter, thread pitch and finish