Description
Diablo D1050CF 10″ 50-Tooth Steel Demon Metal Cutting Saw Blade
Exclusive Cermet II Ceramic-Metallic Teeth. Up to 25X Longer Life vs Abrasives. Spark-Free, Burr-Free Cold Cutting Technology.
The Diablo D1050CF Steel Demon Cermet II 10" Metal Cutting Saw Blade brings heavy-duty cold-metal cutting speed, game-changing dual-material flexibility, and absolute jobsite accuracy directly to your stationary miter saw, slide-cut chop station, or dedicated low-RPM metal saw. Purpose-built to eliminate the choking dust clouds of traditional abrasive wheels, the jagged edges that require tedious deburring rework, and the rapid tip failure common when stepping up to tough alloys, this premium 10-inch ceramic-metallic blade sets a professional fabrication benchmark. It equips mechanical contractors, structural steel shops, field pipefitters, and commercial builders with an elite cold-slicing edge optimized to shear thick stainless steel pipes, chop heavy angle iron, section unistrut channels, and crop large threaded rods cleanly.
Unprecedented thermal management and high-impact structural brazing form the core engineering platform of the D1050CF. The precision teeth are formed from an exclusive Cermet II (Ceramic and Metallic blend) formulation, providing extreme heat tolerance and increased hardness that delivers up to 25 times longer lifespan and 10 times faster cuts compared to standard bonded abrasive grinding discs. Utilizing a high-performance Triple Chip Grind (TCG) configuration, the blade produces large, heavy metal chips that drop immediately from the kerf rather than floating into your lungs as fine respiratory dust. To protect the blade body from warping under punishing loads, the laser-cut steel plate integrates advanced anti-vibration stabilizer vents and is fully coated with a heat-resistant Perma-SHIELD® non-stick armor layer.
Why the Diablo® D1050CF Steel Demon® Cermet II Blade Dominates the Metal Bench:
- Exclusive Cermet II Advanced Formula: High-temperature ceramic and metal blend tips provide ultimate wear resistance, cleanly handling both mild steel and tough stainless steel.
- Up to 50X Cooler Cold-Cuts: Delivers pristine cuts that are completely cool to the touch immediately, generating virtually zero sparks and eliminating hot-permit issues.
- Triple Chip Grind (TCG) Tooth Design: Shaves a smooth, burr-free finish that requires zero manual grinding or secondary edge rework before installation.
- Laser-Cut Anti-Vibration Stabilizer Vents: Advanced expansion slots trap noise and mechanical vibration, keeping the blade cool and dead-straight for accurate tracking.
- Tri-Metal Shock-Resistant Brazing: Specialized high-strength three-metal brazing secures the Cermet II teeth to the plate, allowing them to absorb severe structural impacts without shearing.
Ideal For
- Structural steel cutting
- Fabrication and metal shops
- Construction and installation work
- Maintenance and repair tasks
- Professional contractors and tradespeople
Specifications
| Fabrication Sawing Metric | Universal Specification Details |
| Model SKU Part Number | Steel Demon® Cermet II Industrial Metal Blade / D1050CF |
| Manufacturer Brand Line | Diablo® Tools (By Freud - Premium Metalworking Series) |
| Blade Outer Diameter | 10 Inches (254 mm Standard Heavy-Duty Bench Saws and Chops) |
| Total Structural Teeth | 50 Teeth (Fine-Pitch Pitch Balanced for Smooth Metal Shearing) |
| Tooth Grind Geometry | Triple Chip Grind (TCG Profile for Impact Durability in Alloys) |
| Center Arbor Bore Size | 5/8" Inch Standard Round Arbor (Fits Most Heavy-Duty Slide Saws) |
| Active Kerf Thickness | Thin-Kerf .071" Inch (Low Resistance Slices Fast and Clean) |
| Blade Hook Angle Matrix | 0-Degree Neutral Hook Angle Configuration for Controlled Entry |
| Thermal Protection Armor | Perma-SHIELD® Non-Stick Silver Anti-Heat Armor Coating |
| Primary Material Targets | Mild Steel Studs, Stainless Steel Pipe, Angle Iron, EMT Conduit, Flat Bar |
| Wall Thickness Capacities | Cuts 1/8" to 3/8" in Structural Profiles; 1/4" Max in Solid Plates |
| Feature | Details |
|---|---|
| Product Name | Diablo D1050CF Steel Demon Saw Blade |
| Blade Diameter | 10″ |
| Tooth Count | 50 teeth |
| Blade Type | Metal cutting saw blade |
| Cutting Application | Steel |
| Cutting Method | Dry cutting |
| Arbor Size | Standard 5/8″ |
| Use Type | Professional and heavy-duty use |
| Tool Compatibility | Compatible with standard 10″ saws |
Frequently Asked Questions
+ Can I use this blade to cut both mild steel and stainless steel with the same saw?
+ Can I run this blade on a standard high-speed woodworking table saw or miter saw?
+ What is the functional advantage of a Triple Chip Grind (TCG) tooth pattern in metal fabrication?
+ Why does circular cold-cutting produce a safer, cleaner jobsite than abrasive discs?
Why Choose the Diablo Steel Demon Blade?
This blade is designed to replace abrasive cutting methods with cleaner, faster, and more controlled steel cuts. By reducing heat, sparks, and vibration, the Steel Demon blade improves cut quality while enhancing safety and productivity—making it a trusted choice for professional metal cutting.
Product Specifications
selling_points: |
✔ Clean, cool cuts in steel ✔ Steel Demon design reduces heat ✔ 50-tooth blade for smooth finishes ✔ Trusted Diablo professional quality |
category_bullets: |
10″ 50T Steel Demon Blade – Clean metal cutting Steel Demon Technology – Cool, fast steel cuts Diablo Quality – Pro-grade durability |
