Caddy

CADDY 812M912 EM-M Conduit/Pipe to Flange Clip, Spring Steel Supports conduit/pipe or cable from beam flanges Snap close clip pivots a full 360° Requires only a hammer to install

Nvent  6TIB  Thread Install Rod Hanger with Angle Bracket    Suspends threaded rod from horizontal structures such as laminated wood or concrete beams, joists, ceilings and walls ...

Nvent Caddy BC Beam Clamp 1/4" Rod 1, #10 Rod 2, 1/2" Max Flange Easy installation to beam flanges  

nVent Caddy 16M912 1" EMT, 9/16"–3/4" Conduit/Pipe Flange Clip   Supports conduit/pipe or cable from beam flanges Snap close clip pivots a full 360° Requires only a hammer to install

nVent 812M58 Conduit/Pipe To Flange Clip, Spring Steel 1/2", 3/4" EMT, 5/16–1/2" Flange   FEATURES Supports: conduit/pipe or cable from beam flanges Snap close clip pivots a full 360°...

Caddy Strut End Cap, Blue Fits into ERISTRUT type A channel When separated, these provide two end caps for ERISTRUT Type C channel Material : Polyethylene Color : Blue Strut Type A : 1-5/8" ...

nVent CADDY 812M24 EM-M Conduit/Pipe to Flange Clip Features Supports conduit/pipe or cable from beam flanges Snap close clip pivots a full 360° Requires only a hammer to install Specifications...

nVent CADDY TSR1220N Telescoping Strut Replacement, No Nut Static Load 1 represents a distributed load for 12" - 20" (300 - 500 mm) installations and a point load for 12" - 16" (300 - 400 mm)...

nVent CADDY CRLA37EG 3/8" Rod Lock Anchor Screw   For use on plain and electro zinc plated hardware only. Tested in 3,000 psi (20.68 MPa) concrete and soft or hard wood with a 9/32" pilot hole. ...

nVent Caddy M24S Hammer-On Flange Clip 1/8-1/4", Bottom Mount w/Stud    Features Can be used to support boxes, fixtures or other applications from beam flanges Captive threaded stud...

CADDY 812M24SM H-MSM Conduit/Pipe to Flange Clip, Side Mount   Features Supports conduit/pipe or cable from beam flanges Snap close clip pivots a full 360° Requires only a hammer to install...

Caddy 6TI24 H-Ti/T Rod to Flange Clip 1/8"-1/4" FT   Features Suspends threaded rod from beam flanges Threaded rod hanger can swivel to provide a vertical dropdown Requires only a hammer to...